Decreasing the system weight while maintaining the assistance performance can help reduce the metabolic penalty in exosuits. Various researchers have proposed a bi-directional cabledriven actuator that can provide two degrees of freedom (2-DOF) assistance by using a single motor. However, such systems face limitations associated with the controllability of the assistance force. This study proposes a novel cable-driven system, that is, a dual pulley drive, that can provide versatile controllability of 2-DOF cable actuation by using a single motor via a novel moving gear mechanism. The moving gear winds the cable by switching both the side pulleys, which are then used for 2-DOF cable actuation. The spiral springs embedded between the pulley and base shaft work to release the cable. Results of experiments demonstrate that the dual pulley drive provides a versatile range of motion. The proposed system can provide 34.1% of overlapping motion per cable round trip time and support the non-overlapping motion. The preliminary integration of the dual pulley drive to the exosuit confirms that the novel exosuit is considerably lighter than the state-of-the-art exosuit. The calculations indicate that the operating cable speed and force generated using the proposed design are higher than the existing exosuit.
Loading....